Esplendido HydroVeil
Esplendido HydroVeil
(Advanced Water-Based Invisible Sealer)
Engineered for Natural Stone Perfection — Protection Without Alteration Invisible. Intelligent. Enduring.
Esplendido HydroVeil™ is a premium, water-thinnable protective treatment engineered for high-value natural and engineered stones, Granite, Marble, Limestone, Sandstone, Travertine, Concrete, Brickwork, Terrazzo, Unglazed Ceramic Tiles, and mineral façades. It penetrates deeply into the substrate, creating a breathable, invisible barrier that resists water, oil, grease, and environmental staining — while maintaining the natural tone and texture of the surface. The treatment offers long-term UV stability, alkali resistance, and non-yellowing performance, ensuring years of durable protection in both interior and exterior applications.
Key Performance Features
- Dual Water & Oil Repellency: Provides strong resistance to both water- and oil-based contaminants.
- Preserves Natural Appearance: Does not alter the color, texture, or gloss of the substrate.
- Breathable Protection: Allows internal vapor to escape while blocking liquid ingress.
- Deep Penetration: Forms a durable, invisible barrier within the substrate’s pore structure.
- Alkali & UV Resistance: Retains clarity and protection under sunlight and alkaline exposure.
- Self-Cleaning Effect: Reduces dirt adhesion and simplifies routine maintenance.
- Weather Durability: Performs reliably under rain, humidity, and temperature variations.
- Eco-Safe Composition: Water-based, low-odor, solvent-reduced formulation for safe application and minimal environmental impact.
Recommended Substrates
Granite · Marble · Limestone · Sandstone · Travertine · Concrete · Brickwork · Terrazzo · Unglazed Ceramic Tiles
Dilution Ratio
1 : 4 to 1 : 11 with water
Mixing & Dilution Guidelines
- For normal porosity substrates, dilute 1 part HydroVeil : 5 parts clean water (approx. 17% concentrate).
- For dense, polished, or color-sensitive stones (granite, marble, terrazzo), dilute up to 1 : 11 (approx. 9% concentrate).
- For highly absorbent or weathered materials, use 1 : 4 to achieve deeper penetration.
Application Procedure
1. Surface Preparation: Clean thoroughly to remove dust, oil, wax, coatings, and efflorescence. Ensure the surface is dry and absorbent.
2. Application: Apply the prepared solution by flood coat or saturation method, ensuring complete surface wetting.
3. Second Coat: For optimal durability, apply two coats wet-on-wet.
4. Curing: Surface becomes hydrophobic within hours; full protective effect develops in 24 h depending on porosity and temperature.
5. Clean-Up: Wash tools and splashes immediately with clean water.
Typical Consumption per Coat
Dense Stone (Granite, Marble): 6 – 10 m²/L
Medium-Porosity Stone (Limestone, Travertine): 4 – 8 m²/L
Highly Absorbent Masonry: 3 – 6 m²/L
(Coverage varies with dilution, porosity, and application method.)
Storage & Shelf Life
Store tightly sealed in a cool, shaded, dry place. Protect from frost and direct sunlight. Shelf Life: 24 months (unopened, original container).
Safety & Handling
Avoid contact with skin and eyes. Use gloves and adequate ventilation. Keep out of reach of children. In case of contact, rinse thoroughly with water and seek medical advice if irritation persists. Dispose of material responsibly according to local regulations